The DMS48F provides 4 inputs and 8 outputs (configurable Dante (audio data). analog or digital) with superior processing capacity, dynamic protection functions (based on APG’s analog expertise) combined with extremely flexible mix/mastering possibilities.

Features
• High audio quality
• Dedicated APG Presets
• Control software
• User friendly
• Grouping functionality

Applications
• System management and signal processing for large, complex APG systems, with or without subs
• Digital delay
• Loudspeaker turning
• Signal routing and zoning

General
Inputs: 4 (Analog, AES3 and NetAudio*)
Outputs: 8 (Analog or AES3)
Maximum Input level: +20 dBu
Maximum Output Level: +18 dBu into a 600 Ω load
Sample Rate: 96 kHz
Bit Depth: 24 bits
Frequency Response: 10 Hz a 40 kHz, +/-3 dB (disabled filters)
21 Hz a 20 kHz, +/-0,5 dB (disabled filters)
THD: <0,008 %, (+10 dBu, 20 Hz to 20 kHz, 30 kHz bandwidth)
Typical latency (FIR off, analog in/analog out): 1,53 ms
*Option: Dante NetAudio card (2 ports Primary & Secundary)


Processing
Gain: +20 dB to -80 dB and mute, 0,2 dB steps
Filters type: Bessel, Butterworth, Linkwitz Riley, Hardman, Parametric IIR, All pass and linear phase FIR
Advanced driver excursion, thermal and peak power limiters
Each of the 4 DSP Modules includes max 12 overlays groups, 26 Low shelves, 13 Hi Shelves FIR, 78 full parametric
Delay: Input 1 s, output 1 s

Connectors
Audio inputs: 3 pin female XLR
Audio outputs: 3 pin male XLR
Ethernet port: Shielded RJ45

Characteristics
Dimensions (H, W, D): 1,7" x 19" x 10" (44 x 482 x 254 mm)
Weight: 2,7 kg