The UC206W Uniline Compact line array incorporates 3-way acoustic design. The Lo/Mid section is fitted with two 6.5" cone drivers loaded in compression and optimized for low frequency reproduction.

Mid/Hi coherency comes from coaxial device fitted with 5" / HF 0.5" Neodymium drivers loaded by an Isotop15™ waveguide. This IsotopTM load employs an active annular horn and iso-phase plug to achieve acoustic impedance adaptation and performance comparable to traditional compression drivers, but with greatly increased bandwidth and power handling. Twin 6.5" loudspeakers serve Lo/Mid bandwidth between 80Hz and 450 Hz. The mid-range 5" speaker displays ultra-low distortion and extends from 450 Hz to 5kHz. The 0.5" HF driver operates smoothly from 5 kHz to 20 kHz.

Directivity control, compression, transducer phase alignment and protection are all established through the UC206’s advanced acoustic horn. The mechanical system is totally captive and allows use of Uniline Compact either rigged or stacked. UC115B enclosure is the optional dedicated low frequency enclosure that offers specific ergonomics for cardioids LF pattern control and rigging. APG subwoofers allow infra bass extension. Use of an APG digital processor is required.

Technical features
Usable bandwidth: 55 Hz - 20 kHz
(± 10 dB)
SPL max @ 1m: 132 dB SPL (1)
Nominal directivity (H° x V°): 105° x 15° (2)
Nominal impedance: 16 ohm
Transducers: 2 x 6,5'' ND with ventilated driver - 1 x Isotop15 (5''ND / HF 1'')
Topology: Line Source - Isotop / K-Horn
Type of load: Bass Reflex - Line Source / Isotop / Constant directivity
Way and amplification section: 3 ways, bi-amplified
AES power (W): lo/mid : 300 W (3) | mid/hi : 100 W
Maximum power handling (W): lo/mid : 1200 W (4) | mid/hi : 400 W
Dimensions H,W,D (mm): 8,2" x 21,2" x 14,1" (210 x 540 x 360 mm)
Weight (kg): 35,2 lb (16 kg)
Connectors: 2 x Speakon NL4MP (5)
IP: 43