Semi-Modular Simplicity

Mother-32’s semi-modular design means that no patching is required to create powerful analog sound.

This allows musicians of any experience level to quickly begin making music.

Synthesists will enjoy exploring the extensive 32-point patchbay, which unlocks truly expressive, unique and complex synthesis capabilities.

The patchbay also provides access to a wealth of sounds and functionality including an assignable CV output jack, MIDI to CV conversion, external audio input, a second voltage-controlled mixer, sync, and multiple unit expandability.

32-Note Step Sequencer

Drive synchronized sound with Mother 32’s powerful step sequencer while utilizing its modular patchbay and assignable output to spawn a living, breathing organism with dynamic and modifiable sound processing.

Patch multiple control and sound sources into Mother-32’s voltage controlled mixers and truly unlock the vast potential of this powerful instrument, or pull all of the patch cables, plug in a MIDI cable and simply drive your Mother-32 from any MIDI-equipped device.

Exponentially Expandable

The Mother-32 is secured in an extruded aluminum enclosure with wood sides, but can also easily be relocated to almost any Eurorack enclosure.

Combine multiple Mother-32s to unlock new realms of sound, imagination and creativity.

Push even farther with complete Eurorack integration.

90 Modular Patch points

Though Matriarch’s semi-modular design requires absolutely no patching, 90 modular patch points are easily accessible throughout the panel via the included 3.5mm patch cables.

This powerful electronic instrument is a highly-versatile addition to any stage or studio that can effortlessly transform from a performance keyboard to a fully modular analog synthesizer at a moment’s notice.

In addition to its standalone function, Matriarch is also an ideal processor of external sound sources and a powerful keyboard front-end for expanding a DFAM, Mother-32, Grandmother, or Eurorack modular system.

Specifications

• SOUND ENGINE: Analog
• POLYPHONY: Monophonic
• KEYPAD: 13 Note
• STEP SEQUENCER: 32-Step with 64 Sequence Locations, Keyboard and Step Edit Modes
• SEQUENCER PANEL CONTROLS: Tempo, Swing, Run/Stop, Hold, and Reset
• SOUND SOURCES: 1 Oscillator With Pulse and Saw Waveforms, 1 White Noise Generator, 1 External Audio Input
• OSCILLATOR RANGE: 8Hz-8KHz (16KHz max with LFO/CV)
• FREQUENCY CONTROL: +/- 1 Octave
• VOLTAGE CONTROLLED MIXER: +/- 5V Crossfades Between the Selected Oscillator Wave and External Audio Input (Normalled to White Noise)
• FILTER: 20Hz-20KHz Switchable Low Pass / High Pass 4-Pole Transistor Ladder Filter

Specifications

• GLIDE: Assigned to Pitch (On/Off Per Step)
• MODULATION SOURCES: LFO (TriangLe or Square), VCO Mod Input (Normalled to EG)
• MODULATION DESTINATIONS: Pulse Width, Oscillator Frequency, Filter Cutoff ( Modulation Polarity)
• LFO PANEL RATE: 1Hz to 350Hz (600Hz max)
• ENVELOPE: Selectable AD (Multi-Trigger) / ASD (Single-Trigger)
• VC MIXER: Voltage Controlled Crossfade/Mix Circuit for Mixing Two DC Coupled Signals
• PATCHBAY: 32x 3.5mm Jacks
• CV/GATE INPUTS: External Audio, Mix CV, VCA CV, VCF Cutoff, VCF Resonance, VCO 1V/Octave, VCO Linear FM, VCO Modulation, LFO Rate, Mix 1, Mix 2, VC Mix Control, Mult, Gate, Tempo, Run/Stop, Reset and Hold
• CV/GATE OUTPUTS: VCA, Noise, VCF, VCO Saw, VCO Pulse, LFO Triangle, LFO Square, VC Mix, Mult , Mult 2, Assign, EG, KB, Gate
• ASSIGNABLE OUTPUT: Multipurpose control output for selecting from 16 available functions: Sequencer Accent, Sequencer Clock, Sequencer Clock /2 Sequencer Clock /4, Decimated "Ramp”, Decimated "Saw”, Decimated "Triangle”, Stepped Random, STEP 1, MIDI Note On Velocity, MIDI Channel Aftertouch, MIDI Pitch Bend, MIDI CC1 Mod Wheel, MIDI CC2, MIDI CC4 and MIDI CC7

Specifications

• EXTERNAL AUDIO INPUT: 3.5mm
• AUDIO OUTPUT: ¼” TS Line / ¼” TRS Headphones (Shared Output Jack)
• MIDI IN: 5-Pin DIN input
• MIDI CONTROL: Note, Gate, Pitch Bend (Mod Wheel, After Pressure, Velocity Available Via Assignable Output)
• INCLUDED POWER SUPPLY: 110-250VAC, 50-60Hz, +12VDC 1A
• POWER CONSUMPTION: 2.8W
• EURORACK CURRENT DRAW: 230mA (+12V – from 10-pin header)
• EURORACK MOUNTING DIMENSIONS: 60HP (.69” 26mm Module Depth)
• WEIGHT: 3.5lbs
• DIMENSIONS: 12.57”W x 4.21“H (with knobs) x 5.24“D